General Applications
- Transparent electronic enclosures / prototypes
- Decorative lamps, diffusers, or light-passing parts
- Architectural models with windows/glass
- Functional models showing internal structures
- Accessories or ornaments with aesthetic value
Advantages
- Transparent or semi-transparent prints
- Great for casing prototypes or display models
- Can be polished or smoothed for enhanced clarity
Disadvantages
- Prone to yellowing over time
- Less crisp detail than fine-detail resins due to viscosity
- Requires special handling to maintain clarity
Colors
Not available
Specification
| Property | Value |
|---|---|
| Technology | SLA |
| Shrinking Rate | Medium (~4 - 6%) |
Physical Properties
| Property | Testing Method | Typical Value |
|---|---|---|
| Density | ASTM D4052-18a | 1.09 g/cm³ |
| Viscosity | BROOKFIELD | 200 - 350 cps |
| Light Transmission | N/A | N/A |
| Flame Retardancy | N/A | N/A |
Chemical Resistivity
| Effect | Value |
|---|---|
| Effect of weak acid | N/A |
| Effect of strong acid | N/A |
| Effect of weak alkaline | N/A |
| Effect of strong alkaline | N/A |
| Effect of oil and grease | N/A |
Thermal Properties
| Property | Testing Method | Typical Value |
|---|---|---|
| Heat Deflection Temp | ASTM D648 | 47.9°C at 0.45 MPa |
Mechanical Properties
| Property | Testing Method | Typical Value |
|---|---|---|
| Tensile Strength at Break | ASTM D638 | 34.0 MPa |
| Tensile Modulus | ASTM D638 | 2277.3 MPa |
| Elongation at Break | ASTM D638 | 13.6 % |
| Notched Izod (Machined), 23°C | ASTM D256 | 42.9 J/m |
| Shore Hardness | ASTM D2240 | 78 - 80D |
Last updated: 6/15/2025
