General Applications
- Corner guards, bumpers, or soft casings
- Gaskets, seals, and flexible joints
- Ergonomic grips (tool handles, footpads)
- Wearables (straps, bands, finger guards)
- Functional test models requiring flexibility
Advantages
- Soft and rubber-like flexibility
- Crack resistant
- Ideal for ergonomic and wearable applications
Disadvantages
- Lower detail sharpness than rigid resins
- Tacky Surface if not fully cured
- Become brittle over time with use
Colors
Not available
Specification
| Property | Value |
|---|---|
| Technology | SLA |
| Shrinking Rate | Medium (~4 - 6%) |
Physical Properties
| Property | Testing Method | Typical Value |
|---|---|---|
| Density | ASTM D4052-18a | 1.04 g/cm³ |
| Viscosity | BROOKFIELD | 2300 - 3000 mPas |
| Light Transmission | N/A | N/A |
| Flame Retardancy | N/A | N/A |
Chemical Resistivity
| Effect | Value |
|---|---|
| Effect of weak acid | N/A |
| Effect of strong acid | N/A |
| Effect of weak alkaline | N/A |
| Effect of strong alkaline | N/A |
| Effect of oil and grease | N/A |
Mechanical Properties
| Property | Testing Method | Typical Value |
|---|---|---|
| Tensile Strength at Break | ASTM D412 | 6.30 MPa |
| Elongation at Break | ASTM D412 | 391 % |
| Ross Flex (+Thermal Strengthening) | ASTM D1052 | > 60.000 |
| Rebound Resilience | ASTM D7121 | 40 - 45 % |
| Shore Hardness | ASTM D2240 | 70 - 75D |
Last updated: 6/15/2025
