General Applications
- Light-duty mechanical prototypes or housings
- Snap-fit components, covers, or latches
- Functional accessories under low stress
- Joinery elements or slot covers
- Fixtures or testing jigs
Advantages
- Stronger & lighter compared to standard resins
- Ideal for functional prototypes
- Better impact resistance for light-use components
Disadvantages
- Surface not as smooth as fine-detail resins
- Still more brittle than FDM plastics like PLA/ABS
Colors
Not available
Specification
| Property | Value |
|---|---|
| Technology | SLA |
| Shrinking Rate | Medium (~4 - 6%) |
Physical Properties
| Property | Testing Method | Typical Value |
|---|---|---|
| Density | ASTM D4052-18a | 1.1 g/cm³ |
| Viscosity | BROOKFIELD | 50 - 100 cps |
| Light Transmission | N/A | N/A |
| Flame Retardancy | N/A | N/A |
Chemical Resistivity
| Effect | Value |
|---|---|
| Effect of weak acid | N/A |
| Effect of strong acid | N/A |
| Effect of weak alkaline | N/A |
| Effect of strong alkaline | N/A |
| Effect of oil and grease | N/A |
Thermal Properties
| Property | Testing Method | Typical Value |
|---|---|---|
| Heat Deflection Temp | ASTM D648 | 55 - 60°C at 0.45 MPa |
Mechanical Properties
| Property | Testing Method | Typical Value |
|---|---|---|
| Tensile Strength at Break | ASTM D638 | 29.6 - 33.3 MPa |
| Tensile Modulus | ASTM D638 | 1644.2 - 1742 MPa |
| Elongation at Break | ASTM D638 | 5.6 - 5.8 % |
| Notched Izod (Machined), 23°C | ASTM D256 | 42.3 - 46.5 J/m |
| Shore Hardness | ASTM D2240 | 75 - 80D |
Last updated: 6/15/2025
